*** not enough flash_blocks Consider yourself BLOBed! blob version 2.0.5-pre2 for Freescale M9328MX21ADS i.MX21 DragonBall TO2.1 Application Development System Copyright (C) 1999 2000 2001 Jan-Derk Bakker and Erik Mouw - Patched by Philips. blob comes with ABSOLUTELY NO WARRANTY; read the GNU GPL for details. This is free software, and you are welcome to redistribute it under certain conditions; read the GNU GPL for details. PCE Module version: BLOB-1.7 Memory map: 0x04000000 @ 0xc0000000 (64 MB) r14_svc = 0x000003c1 PCB version detected: indice3 Boot from Power-On-Reset - Block 500ms more for checking PowerKey before continue. Resume boot process... Autoboot in progress, press any key to stop .Loading kernel from flash .... done Starting kernel ... Uncompressing Linux.................................................... done, booting the kernel. Linux version 2.4.20-celf3 (root@wbul04) (gcc version 3.3.2) #1 Wed Feb 28 13:30:26 UTC 2007 CPU: ARM926EJ-Sid(wb) [41069264] revision 4 (ARMv?(8)) CPU: D undefined 14 cache CPU: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Machine: Freescale i.MX2 ADS FCLK=266000 kHz HCLK=133000 kHz IPGCLK=66500 kHz PERCLKs: 1=44333 KHz 2=33250 kHz 3=44333 kHz 4=88666 kHz On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd ip=none mtdparts=s29gl512n:256k@0x00000000(bootloader)ro,896k@0x00040000(kernel)ro,50432k@0x00120000(fs#1),12800k@0x03260000(fs#2),1152k@0x03EE0000(fs#3) Console: colour dummy device 80x30 Calibrating delay loop (skipped)... 132.71 BogoMIPS Memory: 64MB = 64MB total Memory: 63052KB available (1366K code, 299K data, 68K init) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: Simulating APM BIOS version 1.2 (Driver version 1.0) i.MX21 Dynamic Power Management Starting kswapd Disabling the Out Of Memory Killer JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module version 2.6.2 (20011118) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled UART driver version 0.3.6 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize I2C driver Feb 28 2007 / 13:31:04 Initialize i2c-client-dbmx-codec module s29gl512n: probing 16-bit flash bus Amd/Fujitsu Extended Query Table v1.3 at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Using Write Buffer method. cfi_cmdset_0002: buffer_Write_Time = 128 cfi_cmdset_0002: Disabling fast programming due to code brokenness. Using static partition definition Creating 5 MTD partitions on "s29gl512n": 0x00000000-0x00040000 : "bootloader" 0x00040000-0x00120000 : "kernel" 0x00120000-0x03260000 : "fs #1" 0x03260000-0x03ee0000 : "fs #2" 0x03ee0000-0x04000000 : "fs #3" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com VFS: Mounted root (jffs2 filesystem). Freeing init memory: 68K serial c*** Running rc.splash PCB version: ind3 v2 FF board configuration selected: ind3 v2 Driver SYSTCLK: SYSTCLK-1.12 (REFERENCED) Driver GPIO-1.59 (REFERENCED) ****p_gpio_init_low_bat**** GPIO: p_gpio_it_init at 779 Driver FRAMEBUF-1.12 (REFERENCED) Driver SPI-1.20 (REFERENCED) Debug level 3 u32_spi1_MinLenghtForDMAInTX set to 300 u32_spi1_MinLenghtForDMAInRX set to 300 Driver LCD-1.20 (REFERENCED) Driver TVLINK-1.45 (REFERENCED) Reset from Power-On Reset. mke2fs 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) 1024 inodes, 4096 blocks 204 blocks (4.98%) reserved for the super user First data block=1 1 block group 8192 blocks per group, 8192 fragments per group 1024 inodes per group Writing inode tables: done Writing superblocks and filesystem accounting information: done mke2fs 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) 1024 inodes, 4096 blocks 204 blocks (4.98%) reserved for the super user First data block=1 1 block group 8192 blocks per group, 8192 fragments per group 1024 inodes per group Writing inode tables: done Writing superblocks and filesystem accounting information: done **** EOF rc.splash ******** Mon Jan 1 00:00:00 CET 2007 *** Running rc.modules modprobe: Can't locate module mx2_mmc *** Running rc.serial *** Attempting to start S05syslog Starting /sbin/syslogd Done 077 Starting /sbin/klogd Done *** Attempting to start S20network Setting up link for loopback Done *** Attempting to start S23portmap Starting /sbin/portmap Done *** Attempting to start S80emma Loading eMMA post-processor module: Motorola PostProcessor Linux driver ver 0.64 - Copyright (C) 2003 Motorola Inc pp: hw ver = 2 Loading dmab module: Loading eMMA pre-processor module: prp_dbg=0 Motorola PreProcessor Linux driver ver 0.0 - Copyright (C) 2003 Motorola Inc *** Attempting to start S81hantro Loading Hantro decoder module: hmp4d: base_port=0x10026800 irq=50 hmp4d: module inserted Loading Hantro encoder module: hmp4e: base_port=0x10026c00 irq=49 hmp4e: Compatble HW found with ID: 0x004c1882 hmp4e: module inserted. Major = 249 *** Attempting to start S99bgw211 SPI2:: drv_Init :PID of driver: 132 SPI2:: drv_Init :ScanList not provided. Will use the default scan list. SPI2:: drv_Init :ScanChannelList :1 6 11 14 2 7 12 3 8 13 4 9 5 10 SPI2:: drv_Init :setting PhyType to: Rf-to-Rf SPI2:: drv_Init :Ref.Clock parameter not provided SPI2:: drv_Init :Configure target for a reference clock of 'default=40' Mhz. SPI2:: drvRegEtherDev :Interface Name is: eth%d SPI2:: drv_Init :HEOCSIWPOWON: Powering on... SPI2:: drvPhase2Init :Protocol Firmware will be loaded by driver ... SPI2:: drvPhase2Init :Initializing HHAL (PhgHhalInitialize)... Divider : 8 OCR2 : e4015308 (12582912) Reset : 3 / 27 (c497cc00 / e401531c) Reset : 3 / 27 (c497cc00 / e401531c) GPIO: p_gpio_init_gpio_status at 1279 GPIO: POWER_FAIL signal NOT detected at GPIO driver init carry on !!! GPIO: CHARGE_OUT at init GPIO: LOW_BAT_OUT at init GPIO: No accessory plugged at init. - Set Video on jack GPIO: camera to back at init SPI2:: PhgOsal_linux_init_thread :assigning thread name and deamonize() .. SPI2:: drvPhase2Init :Success SPI2:: drvPhase2Init : registering callbacks with HHAL.. SPI2:: drvHhalEventIndicationHandler : SPI2:: drvHhalEventIndicationHandler :PHGHHAL_EVNT_INIT_COMPLETE; setting CARRIER_ON SPI2:: drvPhase2Init :calling PhgHhalQueueMgmtReq()! PhgHhalQueueMgmtReq:1172:HHAL got Init message PhgHhalQueueMgmtReq:1217:HHAL done Init message SPI2:: drvHhalEventIndicationHandler :PS wake (0) in Drvmain SPI2:: drvHhalEventIndicationHandler : SPI2:: drvHhalEventIndicationHandler :PHGHHAL_EVENT_DISCONNECT; setting CARRIER_OFF SPI2:: drvHhalEventIndicationHandler :netdev->flags=0x00001002, IFF_UP=0 SPI2:: drvHhalEventIndicationHandler :device was already closed SPI2:: drvMgmtCfmHndler :Using MAC Address: 00:08:c6:86:84:d9 SPI2:: drvPhase2Init :init etherdev; stopping queue, setting CARRIER_OFF SPI2:: drv_Init :Philips WLAN Drv - loaded - in state: 1 SPI2:: drvInit :Philips WLAN Drv - loaded SPI2:: drvOpen :opening net device SPI2:: drvOpen :Device is not associated! SPI2:: drvOpen :Carrier flag is already set to CARRIER_OFF SPI2:: drvOpen :Disabling again netqueue Invalid command : set_beacon_int Set country code may be not implemented yet !!! requested reg.domain code setting = 3 eth0 reg_domain:set_etsi SPI2:: drvIoctl :set u8LinkAdaptation : 1 Result=[0] SPI2:: drvIoctl :changed HEOCSIWLNADPALLOWRATES: 8 allowed rate codes SPI2:: drvInitConnect :Req to connect to new WLAN network SPI2:: drvInitConnect :Disabling TX queue and setting CARRIER_OFF SPI2:: drvInitConnect :Connecting To AP... SPI2:: drvInitConnect :step2 SPI2:: drvHhalEventIndicationHandler : SPI2:: drvHhalEventIndicationHandler :PHGHHAL_EVENT_DISCONNECT; setting CARRIER_OFF SPI2:: drvHhalEventIndicationHandler :netdev->flags=0x00001003, IFF_UP=1 SPI2:: drvHhalEventIndicationHandler :device was already opened; stopping queue SPI2:: drvInitConnect :step3 : u8Status 255 SPI2:: drvInitConnect :step5 SPI2:: drvInitConnect :TIMEDOUT SPI2:: drvInitConnect :step6 SPI2:: drvInitParamsAndPowerOnAndConnect :Connect failed! Interface doesn't accept private ioctl... qos_parameter (8BEC): Machine is not on the network config mode .... *** Running rc.local ******** running rc.local ******** Motorola CSI Linux driver ver 0.1 - Copyright (C) 2004 Motorola Inc Driver SENSOR-1.29 (REFERENCED) i2c-client version : 1.9 Initialize i2c-client-aic14 module Module i2c-client-aic14 initialized Insert module aic14 (AIC14-1.0) Module AIC14 assumes CODEC MCLK already configured for 20480000Hz Driver KPP-1.36 (REFERENCED) Driver DOZE-1.27 (REFERENCED) doze inserted with major number 154 +++++++++++++++++++++++++++++++++ MACAddress="00:08:c6:86:84:d9" PN="LJ020711010303" Test_status="C" Barcode="NA" +++++++++++++++++++++++++++++++++ **** EOF rc.local *************** imx21 login: